E46 series BMW 3

1 Lower glass completely down.
2 Remove door facing, uncover in the right part above, address to appropriate section.

It is not necessary to remove a lateral safety cushion.

3 Take out a small screw-driver two clips of-2-covers-1-from a forward end face of a door.

4 Uncover-1-, thus begin from below. Take out a cover at the door limiter.

5 Take out a cover above from a flat clip (poses. And on an illustration) also wring out so that to provide up access to screws of fastening of a mirror.

6 Rasstykuytes I will corrode protection against a jamming glass (it is white / a black cable).

7 Unscrew screws of fastening-2-sound signals of a high-pitch tone-1-and remove it.

8 Rasstykuytes I will corrode exterior mirrors.
9 Holding a mirror outside, turn out the screw-3-.
10 Remove a mirror, thus pass through a door electric wires.

11 Establish a mirror, thus pass through a door electric wires.
12 Holding a mirror outside, fix it the screw - 3-.
13 Fix a sound signal of a high-pitch tone. Tighten screws-2-and-3 - the moment of 6 N • m.
14 Join the socket of a mirror of an exterior and protection against a jamming glass.
15 Press protection against a jamming into a clip - And-.
16 Insert a cover of protection against a jamming on the limiter of a door and fix two clips at a door end face.
17 Establish door facing, address to appropriate section.