E46 series BMW 3
+ BMW 3 Cars (E46)
- Current leaving and service
Introduction
Current leaving
General information on control
Check of levels of liquids
Check of a condition of tires and pressure in them. Designation of tires and disks of wheels
Replacement of impellent oil and oil filter
Replacement of a filtering element of the air filter
Checks of brake system
Replacement of an element of the filter of air of salon
Check of a condition of driving ridge belts
Check of a condition and replacement of hoses of an impellent compartment
Check of functioning of system of cooling and frost resistance of cooling liquid
Check of a condition of system of production of the fulfilled gases
Check of level of oil in a manual box of gear shifting
Check of a condition of components of a suspension bracket and steering
Check of a condition of protective covers of power shafts
Check of level of liquid of system of hydrostrengthening of a wheel
Visual check of a body and its bottom
Check of seat belts
Rotation and replacement of wheels
Condition check, replacement of brushes and adjustment of a corner of screen wipers
Check of a condition of the battery, care of it and charging
Replacement of brake liquid
Check and replacement of spark plugs
Check of fuel system, replacement of the fuel filter. Operation of diesel model in the conditions of winter
Greasing of loops and locks of doors
Replacement of a battery of a key of remote control
+ Engine
+ Systems of cooling, heating
+ Power supply systems, injection and release
+ engine Electric equipment
+ RKPP and transmission line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ electric equipment Schemes
|
Replacement of an element of the filter of air of salon The filter detaining a dust and pollen of plants, in system of ventilation and heating of salon is located in a water modular compartment under a cover. If supply of air in salon sharply decreased, it is necessary to replace the filter earlier, than is provided by the maintenance plan. Replacement is carried out in the following sequence:
|
1 Open a cowl. Turn clips-1-on 90 ° (1/4 turns) and remove forward a cover of the air filter of ventilation of salon. |
|
2 Take out filtering element-1-. |
3 Insert a new filtering element.
4 Insert in front a cover, close clips. Close a cowl.
EACH 2 YEARS OR 20 000 KM OF RUN |
|
