|
|
E46 series BMW 3since 1998 of releaseRepair and car operation |
|
|
E46 series BMW 3 - BMW 3 cars (E46) Identification numbers of the car Acquisition of spare parts Technology of service, tool and workplace equipment Poddomkrachivaniye and towage Engine start from the auxiliary power supply Checks of readiness of the car to operation Automobile himikaliya, oils and greasings Diagnostics of malfunctions Governing bodies and operation receptions Governing bodies and devices Filling Keys, uniform lock and anticreeping system Security сигнализация* Window regulators The hatch with elevating and movable крышкой* Seats Adjustment of provision of a steering wheel Mirrors Safety systems Lock of ignition and engine start Parking brake Manual box of gear shifting (RKPP) Automatic transmission (AT) * Lever of the switch of indexes of turn / light signal Screen wipers and stekloomyvatel Heater of back glass Tempostat (automatic equipment of maintenance of the set speed) * The alarm system of emergency rapprochement at a parking (PDC) * System of automatic stabilization of stability with a regulator of a torque of the ASC+T/engine System of dynamic control of stability of DSC* The monitoring system of pressure of air in tires (RDC) * Lighting and light devices Heater, ventilation and conditioner of air of salon Salon equipment Running in Features of driving of the car Catalytic converter Anti-blocking system of brakes (ABS) Disk brakes Brake system Luggage compartments Automobile телефон* Readjustment of headlights Cowl Unlocking of a cover of the refueling hatch manually Drive of an elevating and movable cover of the hatch вручную* + Current leaving and service + Engine + Systems of cooling, heating + Power supply systems, injection and release + engine Electric equipment + RKPP and transmission line + Automatic transmission + Coupling and power shafts + Brake system + Suspension bracket and steering + Body + Onboard electric equipment + electric equipment Schemes 
|
Mirrors
External rear-view mirrors 1 Switch for adjustment of provision of a mirror in four directions. 2 Switch from one mirror on another. 3 Klavisha* for data and cultivation of mirrors. As a result of pressing a key of a mirror nestle on a body or get divorced in the parties that is convenient at journey through a sink, at movement on narrow streets, and also for return of mirrors to a starting position if they were earlier casually displaced forward. To press mirrors to a body it is possible, only if speed of the car does not exceed 10 km/h. The provision of mirrors can be regulated and manually, turning them for a fringing of glasses. External, асферически изогнутая* the part of a reflecting surface provides at some distortion of the image bigger sector of the review in comparison with internal, выпуклой* a part the corner of the back review as a result increases and the so-called "dead" zone is reduced. The distant mirror from the driver has more convex reflective surface in comparison with a mirror on a door of the driver. Subjects seen in it seem more remote, than actually. Therefore it is only conditionally suitable for a distance assessment to moving vehicles. The told belongs and to external асферически the bent part of a mirror. Электрообогрев* The heating of both mirrors is carried out automatically depending on air temperature at ignition key turn in situation 2. Rear-view mirror in salon
Cosmetic mirrors with подсветкой* To use a mirror, cast away a sun-protection peak down and if the mirror is closed, shift its cover aside. Illumination of mirrors joins already at ignition key installation in situation 1. Sun-protection peaks It is possible not only to throw back peaks down, but also to take aside to lateral glasses. No-glare (automatically blacked out) mirror back вида* in salon The difference of values is defining size for change of electric tension on a jellylike layer of a mirror. This layer reacts to change of tension and provides smooth blackout of a mirror. Thus, need most disappears to regulate extent of blackout of a mirror that allows the driver to concentrate the attention to the road completely. At inclusion of transfer of a backing or at transfer of a control lever of AT to situation R the mirror is automatically switched to a mode of complete reflection without blackout. For normal work of a mirror it is important to cover and keep nothing clean its photo cells. One photo cell (it is shown by an arrow) is in a mirror, and another - on its reverse side. Address also to the Section an interior Mirror with automatic blackout. |
|