E46 series BMW 3

since 1998 of release

Repair and car operation


E46 series BMW 3
- BMW 3 cars (E46)
   Identification numbers of the car
   Acquisition of spare parts
   Technology of service, tool and workplace equipment
   Poddomkrachivaniye and towage
   Engine start from the auxiliary power supply
   Checks of readiness of the car to operation
   Automobile himikaliya, oils and greasings
   Diagnostics of malfunctions
   Governing bodies and operation receptions
   Governing bodies and devices
   Filling
   Keys, uniform lock and anticreeping system
   Security сигнализация*
   Window regulators
   The hatch with elevating and movable крышкой*
   Seats
   Adjustment of provision of a steering wheel
   Mirrors
   Safety systems
   Lock of ignition and engine start
   Parking brake
   Manual box of gear shifting (RKPP)
   Automatic transmission (AT) *
   Lever of the switch of indexes of turn / light signal
   Screen wipers and stekloomyvatel
   Heater of back glass
   Tempostat (automatic equipment of maintenance of the set speed) *
   The alarm system of emergency rapprochement at a parking (PDC) *
   System of automatic stabilization of stability with a regulator of a torque of the ASC+T/engine System of dynamic control of stability of DSC*
   The monitoring system of pressure of air in tires (RDC) *
   Lighting and light devices
   Heater, ventilation and conditioner of air of salon
   Salon equipment
   Running in
   Features of driving of the car
   Catalytic converter
   Anti-blocking system of brakes (ABS)
   Disk brakes
   Brake system
   Luggage compartments
   Automobile телефон*
   Readjustment of headlights
   Cowl
   Unlocking of a cover of the refueling hatch manually
   Drive of an elevating and movable cover of the hatch вручную*
+ Current leaving and service
+ Engine
+ Systems of cooling, heating
+ Power supply systems, injection and release
+ engine Electric equipment
+ RKPP and transmission line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ electric equipment Schemes

2b332cca

Filling

The cover of the refueling hatch opens by pressing its back edge.

For information on cover unlocking at failure of the uniform lock address to the Section Unlocking of a cover of the refueling hatch manually.

At the treatment of fuel at filling stations observe the safety rules hung out there.


The stopper of a fuel tank should be inserted in the holder on the back party of a cover of the refueling hatch.

When filling it is necessary to put the refueling gun on a mouth of a fuel tank. If to raise the gun during filling, it will bring:

to fuel interruption of supply
to weakening of branch паров gasoline if the gun has system of branch of these паров


Pressure of air in tires (Address to Specifications).

You will find standards of pressure also in the plate on a rack of a door of the driver. The plate is visible at an open door.


Pressure check

Standards of pressure (address to Specifications) are given in a bar (superfluous pressure) for cold (i.e. having ambient temperature) tires.
At towage of the trailer the standards of the pressure relating to operation with raised loadings operate only.

Cars with control of pressure of air in tires (RDC) *:

After pressure finishing to norm it is necessary to make active again system, address to the Section the Monitoring system of pressure of air in tires (RDC).

Regularly (is not more rare than two times a month) and before distant trips check pressure in tires. The pressure deviation in tires from norm can cause their damage and violation of controllability and by that to lead to failure.

Check also pressure in compact / spare колесе*. In a spare wheel the maximum pressure specified in Specifications should be supported.