E46 series BMW 3

since 1998 of release

Repair and car operation

E46 series BMW 3
- BMW 3 cars (E46)
   Identification numbers of the car
   Acquisition of spare parts
   Technology of service, tool and workplace equipment
   Poddomkrachivaniye and towage
   Engine start from the auxiliary power supply
   Checks of readiness of the car to operation
   Automobile himikaliya, oils and greasings
   Diagnostics of malfunctions
   Governing bodies and operation receptions
   Governing bodies and devices
   Keys, uniform lock and anticreeping system
   Security сигнализация*
   Window regulators
   The hatch with elevating and movable крышкой*
   Adjustment of provision of a steering wheel
   Safety systems
   Lock of ignition and engine start
   Parking brake
   Manual box of gear shifting (RKPP)
   Automatic transmission (AT) *
   Lever of the switch of indexes of turn / light signal
   Screen wipers and stekloomyvatel
   Heater of back glass
   Tempostat (automatic equipment of maintenance of the set speed) *
   The alarm system of emergency rapprochement at a parking (PDC) *
   System of automatic stabilization of stability with a regulator of a torque of the ASC+T/engine System of dynamic control of stability of DSC*
   The monitoring system of pressure of air in tires (RDC) *
   Lighting and light devices
   Heater, ventilation and conditioner of air of salon
   Salon equipment
   Running in
   Features of driving of the car
   Catalytic converter
   Anti-blocking system of brakes (ABS)
   Disk brakes
   Brake system
   Luggage compartments
   Automobile телефон*
   Readjustment of headlights
   Unlocking of a cover of the refueling hatch manually
   Drive of an elevating and movable cover of the hatch вручную*
+ Current leaving and service
+ Engine
+ Systems of cooling, heating
+ Power supply systems, injection and release
+ engine Electric equipment
+ RKPP and transmission line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ electric equipment Schemes


Catalytic converter

The catalytic converter reduces toxicity of the fulfilled gases.

It is authorized to fill only on unleaded gasoline.

Even insignificant impurity of a tetraetilsvinets has enough completely to put out of action the oxygen sensor and the catalytic converter.

In order to avoid possible damages and for ensuring continuous work of the engine it is necessary to observe the following rules:

- Surely carry out all established works on maintenance.
- Watch timely refueling of a tank.
- At emergence of interruptions in operation of the engine at once suppress it.
- Start by towage is possible only with the cold engine. Otherwise not burned down fuel will get to the catalytic converter. For start of the engine it is better to use auxiliary cables.

Avoid other situations at which fuel burns down not completely or does not burn down at all, for example frequent or long using a starter with short intervals between inclusions, repeated unsuccessful attempts to get the engine (start or a stop serviceable in every respect the engine thus does not mean), operation of the engine at the removed tip of a spark plug.

Surely observe the above-stated recommendations, differently not burned down fuel will get to the catalytic converter. As a result there will be a danger of an overheat and damage of the catalytic converter.

At operation of the catalytic converter, on whatever car it was established, high temperature develops. The heat-shielding screens mounted in a zone of exhaust devices, it is impossible to remove or cover with anticorrosive mastic. It is necessary to watch that during movement, at operation of the engine idling or on parking the heated parts of system of production of the fulfilled gases did not appear in dangerous proximity from inflammable materials (a grass, foliage, straw, etc.). Otherwise there is a danger of their ignition connected with risk of heavy traumas for victims and drawing of a significant material damage.