|
|
E46 series BMW 3since 1998 of releaseRepair and car operation |
|
|
E46 series BMW 3 - BMW 3 cars (E46) Identification numbers of the car Acquisition of spare parts Technology of service, tool and workplace equipment Poddomkrachivaniye and towage Engine start from the auxiliary power supply Checks of readiness of the car to operation Automobile himikaliya, oils and greasings Diagnostics of malfunctions Governing bodies and operation receptions Governing bodies and devices Filling Keys, uniform lock and anticreeping system Security сигнализация* Window regulators The hatch with elevating and movable крышкой* Seats Adjustment of provision of a steering wheel Mirrors Safety systems Lock of ignition and engine start Parking brake Manual box of gear shifting (RKPP) Automatic transmission (AT) * Lever of the switch of indexes of turn / light signal Screen wipers and stekloomyvatel Heater of back glass Tempostat (automatic equipment of maintenance of the set speed) * The alarm system of emergency rapprochement at a parking (PDC) * System of automatic stabilization of stability with a regulator of a torque of the ASC+T/engine System of dynamic control of stability of DSC* The monitoring system of pressure of air in tires (RDC) * Lighting and light devices Heater, ventilation and conditioner of air of salon Salon equipment Running in Features of driving of the car Catalytic converter Anti-blocking system of brakes (ABS) Disk brakes Brake system Luggage compartments Automobile телефон* Readjustment of headlights Cowl Unlocking of a cover of the refueling hatch manually Drive of an elevating and movable cover of the hatch вручную* + Current leaving and service + Engine + Systems of cooling, heating + Power supply systems, injection and release + engine Electric equipment + RKPP and transmission line + Automatic transmission + Coupling and power shafts + Brake system + Suspension bracket and steering + Body + Onboard electric equipment + electric equipment Schemes Access exclusive content and early releases on Soap2day. 
|
Automobile himikaliya, oils and greasings Card of viscosity of impellent oils
In sale the set химикалиев, oils and the greasings, necessary procedures arrives during performance of routine maintenance and car repairs. The wide range of products of the chemical and oil-extracting industry - from cleaning structures and solvents, to oils, greasings and aerosols for protection of rubber and plastic components of the car here enters. Cleaners The cleaner for systems of injection and air a zaslonok represents strong solvent of pitches, a deposit and coal deposits. The most part of cleaners leaves after itself greasing film of dry type which does not harden and not засмаливается eventually. In view of formation of such film these cleaners are not recommended to be used for washing of electric components. The cleaner for brake systems is applied to removal of traces of greasing and brake liquid from surfaces of components of brake system where absolute purity is a paramount condition of efficiency of functioning. The cleaner does not leave any traces and in many cases eliminates the squeal of brake mechanisms caused by pollution of their components. The cleaner for electric components promotes elimination of oxide films, corrosion and deposit traces from contact surfaces without elektroprovodnost violation. Also it can be used for cleaning of spark plugs, jets, regulators of tension and other knots where complete cleaning of oil and fat is desirable. To Vlagopoglotiteli serve for water and moisture removal from surfaces of such electric components as the generator, a tension regulator, the assembly block of safety locks, electric sockets, etc. Vlagopoglotiteli usually are not current-carrying, not causing corrosion and not inflammable. Obezzhirivateli is represented by superstrong solvents and serve for removal of traces of greasing from external surfaces of the engine and chassis components. Are issued in the form of aerosols or are put with a brush or a brush and, depending on type, are washed away either water, or solvent. Greasing liquids Impellent oils represent specially developed structures for greasing of internal components of the engine. Usually contain wide different range of the additives serving for prevention of foaming and corrosion. Impellent oils are issued various degree of viscosity - from 5 to 80. Need of application of oil of this or that grade usually is defined by climatic conditions and requirements of the concrete engine. Liquid (light) oils are usually applied in the conditions of a frigid climate and at insignificant loads of the engine. Heavy (viscous) oils are used in hot conditions and at raised loads of the engine. All-weather oils possess characteristics both easy, and heavy oils and usually have designations from 5W-20 to 20W-50. Transmission oil is developed for application in differentials, transmissions, and other knots where stability to influence of high temperatures is required. Greasing for components of the chassis and bearings of wheels represents the dense greasing applied in knots, subject to the raised loadings and a friction, such as bearings of wheels, spherical support of a suspension bracket, tips of steering drafts and kardanny hinges. High-temperature greasing for bearings of wheels is capable to resist to influence of the high temperatures arising in bearings of wheels of cars, equipped with disk brake mechanisms. Usually contains the disulfide of molybdenum being greasing substance of dry type. White greasing (tsiaty) represents the dense greasing put on metal surfaces contacting among themselves in places where there are problems with the increased moistening. Remains soft both at low, and at high temperatures, it is not washed away and it is not diluted by water. Assembly greasing represents special greasing, for application in the conditions of high pressures, usually contains molybdenum and is used for greasing of the knots subject to raised loadings (such as radical and shatunny bearings and working ledges of cams) before the first start of the engine after completion of major maintenance. Silicone greasings are applied to protection of rubber, plastic, vinyl and nylon components. Graphite greasings serve for application where oil cannot be used in a type of problems with pollution (for example, in locks). Dry graphite perfectly greases metal details, preventing influence on them of moisture, acids and other aggressive pollution. Greasing is electrowire and does not break contact in such knots, as, for example, the ignition lock. Getting structures are applied by Molibdensoderzhashchiye to simplification of an otdavaniye of the "become attached" fixture, and also for fixture greasing in order to avoid its corrosion in the future. Heatwire greasing is not electrowire and serves for installation of electronic modules of ignition from which intensive heat removal is required. Hermetics RTV hermetic is most widely applied prokladochny hermetic. It is made on the basis of silicon, stiffens on air, provides sealing, gluing, is waterproof, fills defects of surfaces, remains elastic, it is not compressed and does not sit down, it acts rather easily in film and applied in addition practically to all laying on knots where temperatures do not exceed average values. Anaerobny hermetic unlike RTV hermetic can be applied not only in addition to laying, but also to formation of those. Remains elastic, it is steady against influence of solvents and well fills roughnesses of surfaces. The main difference from RTV hermetic consists in hardening conditions. If RTV hermetic starts to stiffen after hit on air, anaerobny hermetic rises only in lack of air. It means that hardening of such hermetic occurs only after assembly of components and their dense pressing to each other. Hermetic for pipes and carving connections is applied to sealing of shtutserny connections of hydraulic, pneumatic and vacuum lines. It is usually made on the basis of a teflon compound and it is delivered in the form of the aerosols put like paint of liquids or in the form of a tape (FUM). Himikaly The anti-taking compound serves for the prevention of "prikipaniye", corrosion, jamming and a cold privarivaniye of fixture. High-temperature anti-taking hermetics usually are made on the basis of medsoderzhashchy or graphite greasings and used in fixture of system of release and a final collector. Taking compounds serve Anaerobnye for prevention of a spontaneous otdavaniye of fixture under the influence of vibrations and stiffen only after installation in absence of contact to air. Taking compounds of average capacity are applied to fixing of small fixture (nuts, bolts, screws) which are subject to a regular otdavaniye further. High-power compounds are usually used for blocking of the large fixture which otdavaniye is not made on a regular basis. Additives to oil serve for change of chemical properties of oil without change of its viscosity for the purpose of decrease in an internal friction in the engine. It is necessary to notice that the majority of the firms manufacturers which are letting out engine oils, warn against use of any additives to them. Additives to fuel carry out at once some functions, depending on the chemical composition. Usually contain the solvents promoting a conclusion шлама and removal of a deposit from internal surfaces of components of system of injection of fuel and an inlet path. Besides, application of such additives promotes removal of the coal deposits which are forming on walls of chambers of combustion. The structure of some additives includes the substances serving for greasing of components of the top part of a head of cylinders (the klapanny mechanism, piston rings), others promote condensate removal from walls of a fuel tank. The other Brake liquid - represents specially developed structure, capable to resist to influence of high temperatures and the pressure arising in brake system. It is not necessary to allow contact of brake liquid to the painted surfaces of the car and open sites of a body. It is necessary to keep brake liquid in tightly closed container in order to avoid moisture hit in it (liquid is very hygroscopic) and dirt. Glue for fastening of sealing strips of body apertures as it is clear from its name, serves for fastening of sealing strips of apertures of doors, windows and covers of luggage compartments. It can be applied to fixing of elements of internal furnish. Anticorrosive coverings for the bottom of the car are represented by the gudronoobrazny structure made on an oil basis and serves for a sheeting of metal surfaces, preventing their corrosion. Besides, carries out function of sound insulation of salon. Wax and polyrole are applied to protection of the painted surfaces against environment influences. Use of various type восков and polyroles can demand various type of paint. The structure of some polyroles includes the abrasive or chemical additives serving for removal of an external layer of oxides (tarnishing) from painted surfaces of old cars. Recently in the market are widely presented different polyroles not containing wax which structure includes a set of chemical additives, such as polymers or substances on a silicon basis. Such polyroles usually are put and keep more long than usual (wax) easier. |
|