|
4 Establish into place the block the electric motor – a reducer and attach it. Fix it slightly the moment of 3 NChM two short screws-2-and one long - 1-. Surely establish new screws. If it is impossible, grease screws previously with means for fixing of carving connections, for example, Loctite 270.
5 Join the socket of the switch of a drive, establish a cover.
Initialization of the movable panel
6 Establish the movable panel in the provision of lifting and then press the switch of the movable panel further in the direction “Provision of lifting”.
7 Keep the switch 5 with in the provision of lifting after:
- each interruption of a food or
- roof adjustments.
8 Keep the switch 20 with in the provision of lifting after:
- malfunctions in work
- detachments of a drive or
- works with hummock drafts.
9 Initialization is considered finished if the movable panel once again is shortly pressed in the direction “Provision of lifting” (click). |
