Removal and installation of the tank/pump of a washer
The tank with pumps glass - and a faroomyvatel
1 — the washer tank 2 — a grid 3 — a cover 4 — the pump of a faroomyvatel 5 — a grid 6 — the pump of a stekloomyvatel
7 — a grid 8 — the level sensor 9 — the heat-shielding screen 10 — саморез 11 — a nut
REMOVAL
1 Unscrew bolts of fastening of the tank-1-to the left amortization rack-2-and take out from bottom directing-3-.
2 Rasstykuytes I will corrode the washer pump.
Attention: If it is necessary to replace only the pump, leave the tank in an impellent compartment. Prepare the new pump. Take out the pump from the tank and cover an opening with a finger. At once put in an opening on the tank the new pump.
3 Merge water from the tank in the corresponding capacity. 4 Remove a hose and take out the tank. 5 Take out the pump from the tank.
INSTALLATION
3 Merge water from the tank in the corresponding capacity. 4 Remove a hose and take out the tank. 5 Take out the pump from the tank.
