E46 series BMW 3

1 Remove the holder of a lamp in a back lamp, address to the Section Replacement of filament lamps of external lighting.
2 Take out floor facing.
3 Take out a cover of a spare wheel and a jack.
4 Remove the holder of an emergency triangle. For this purpose take out a rivet.
5 Disconnect facing of a wall of a luggage carrier at an external edge.
6 Take out a rivet in the center from above from the left lateral facing.
7 Incline down to the center of the car and take out lateral facing.

Installation is carried out in sequence, return to removal.

Specially for cars with a leaning-back back of a back seat

9 Remove боковину backs of a back seat.
10 Lift forward a back and take out a rivet in front above from боковины.

11 Remove the holder of a lamp in a back lamp, address to the Section Replacement of filament lamps of external lighting.
12 Take out facing of a floor and a cover of a spare wheel and a jack.
13 pull emergency blocking of a cover of a fuel tank A little. Disconnect a cable from the handle.
14 Turn on a corner 90 ° (1/4 turns) a clip in the center above at right боковины and thus release it.
15 Disconnect facing of a wall of a luggage carrier at an external edge.
16 Remove partially a peak above in front, incline боковину forward to the center of the car and take out.

Installation is carried out in sequence, return to removal.