E46 series BMW 3

since 1998 of release

Repair and car operation



E46 series BMW 3
+ BMW 3 Cars (E46)
+ Current leaving and service
+ Engine
+ Systems of cooling, heating
+ Power supply systems, injection and release
+ engine Electric equipment
+ RKPP and transmission line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
- Suspension bracket and steering
   + Forward suspension bracket
   + Back suspension bracket
   - Steering with the hydraulic booster (servoupravleniye)
      Removal and installation of the block of a safety cushion on a steering wheel
      Removal and installation of a steering wheel
      Removal and installation of a tip of steering draft
      Removal and installation of steering draft
      Removal and installation of the pump of the hydraulic booster
      Filling with liquid and air removal from hydrosystem of the amplifier of a wheel
      Corners of installation of forward wheels. Check of installation of wheels
+ Body
+ Onboard electric equipment
+ electric equipment Schemes


2b332cca

Removal and installation of the block of a safety cushion on a steering wheel

Before removal of the block of a safety cushion surely familiarize with instructions on security measures.


 REMOVAL

1 Disconnect a negative cable (-) the storage battery at the switched-off ignition. The storage battery is located in a luggage carrier behind a cover on the right side. At BMW 316i, 318i the storage battery is located in an impellent compartment.

At shutdown of the storage battery these memories of malfunctions of separate devices are erased. If necessary before shutdown of the battery consider these memories. Address to the Section Diagnostics of malfunctions. Work it is desirable to lead HUNDRED in conditions.

2 Unblock a steering column and extend as far as this probably steering wheel and establish it in extreme bottom situation.
3 Turn a steering wheel on угол90 ° (1/4 turns) from average situation so that spokes stood vertically.

4 Unscrew Torx T30 screw-driver - 2-behind the top screw of fastening of a steering wheel-1-. The face angular key can be applied to an otvorachivaniye of the screw. Turn a steering wheel on 180 ° (1/2 turns) and completely unscrew the second screw of fastening of a safety cushion. Screws remain in a steering wheel.

5 hook a screw-driver the safety cushion block A little. Press a clamp of the tip of a safety cushion and расстыкуйте I will corrode. If is available, расстыкуйте the socket of a multifunctional steering wheel.
6 Remove the block of a safety cushion and put it the soft party up, for example, in a luggage carrier.


 INSTALLATION

7 Check, whether the negative cable (-) the storage battery is disconnected.
8 Fix the socket of the block of a safety cushion so that click was heard. If there is a socket of a multifunctional steering wheel, join it.
9 Establish into place the block of a safety cushion and fix it from a reverse side of a steering wheel the moment of 2 N • m a dinamometrichesky key of HAZET-6108-1 CT and a head 2223 – Т30. Thus watch that the cable was not clamped.

During shutdown of the storage battery stay in the car of people is not allowed.

10 Attach a negative cable (-) the storage battery at the switched-off ignition, establish time on hours.