|
|
E46 series BMW 3since 1998 of releaseRepair and car operation |
|
|
E46 series BMW 3 + BMW 3 Cars (E46) + Current leaving and service + Engine + Systems of cooling, heating + Power supply systems, injection and release + engine Electric equipment + RKPP and transmission line + Automatic transmission + Coupling and power shafts + Brake system - Suspension bracket and steering + Forward suspension bracket - Back suspension bracket Removal and installation of the back shock-absorber Removal and installation of springs of a suspension bracket + the Steering with the hydraulic booster (servoupravleniye) + Body + Onboard electric equipment + electric equipment Schemes 
|
Back suspension bracket Suspension bracket of back wheelsThe BMW car of the 3rd series has an independent suspension bracket of each back wheel with the central lever. Each back wheel goes three levers: two cross-section and one longitudinal. Cross-section levers are connected with the longitudinal lever and an axis beam. The longitudinal lever is fixed by bolts through a rubber support in front to the body bottom. On a beam the differential is fixed. All elements of a back suspension bracket have rubber support elastic and not demanding service that reduces transfer of the fluctuations resulting influence of the road and the power unit, by salon with passengers. Podressorivaniye of the car is carried out by means of screw springs and shock-absorbers. Stability of the car on turns is carried out by the stabilizer of cross-section stability. The torque from the engine and RKPP is transferred to back wheels via the driveshaft, differential and power shafts.
|
|