E46 series BMW 3

since 1998 of release

Repair and car operation

E46 series BMW 3
+ BMW 3 Cars (E46)
+ Current leaving and service
+ Engine
+ Systems of cooling, heating
+ Power supply systems, injection and release
+ engine Electric equipment
+ RKPP and transmission line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
- Suspension bracket and steering
   + Forward suspension bracket
   + Back suspension bracket
   - Steering with the hydraulic booster (servoupravleniye)
      Removal and installation of the block of a safety cushion on a steering wheel
      Removal and installation of a steering wheel
      Removal and installation of a tip of steering draft
      Removal and installation of steering draft
      Removal and installation of the pump of the hydraulic booster
      Filling with liquid and air removal from hydrosystem of the amplifier of a wheel
      Corners of installation of forward wheels. Check of installation of wheels
+ Body
+ Onboard electric equipment
+ electric equipment Schemes

Removal and installation of a steering wheel

REMOVAL

1 Remove the safety cushion block, address to appropriate section.

Before removal of the block of a safety cushion surely familiarize with instructions on security measures.

2 Turn a steering wheel and establish directly forward wheels. The spoke of a steering wheel should stand horizontally.
3 Weaken the screw of fastening by a head on 16 mm, holding thus a steering wheel from rotation.
4 Turn out the screw and remove a steering wheel.

INSTALLATION

5 Check, whether there are forward wheels directly.

6 Put a steering wheel so that markings on a steering wheel-1-and a steering column-2-coincided.

7 Fix a steering wheel, having wrapped the screw of fastening the moment of 63 N • m.
8 Establish into place the safety cushion block, address to appropriate section.